document number: 28547 for technical questions, contact: mlcc@vishay.com www.vishay.com revision: 21-dec-09 1 surface mount multilayer ceramic chip capacitors for ultra high q commodity applications vj....w1bc ultra high q/low esr vishay features ? ultra stable class 1 dielectric ? ultra high q and low esr at high frequency ? three standard sizes ? high srf characteristic ? ultra low capacitance to 0.1 pf ? high precision capacitance tolerance 0.05 pf ? supplied in tape on reel ? ni-barrier with 100 % tin terminations ? dry sheet manufacturing technology ? base metal electrode system (bme) ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 applications ? mobile telecommunication ? wlan ? rf modules ? tuner electrical specifications note: electrical characteri stics at + 25 c unless otherwise specified operating temperature: - 55 c to + 125 c capacitance range: 0.1 pf to 47 pf voltage range: 25 vdc to 250 vdc temperature coefficient of capacitance (tcc): 0 ppm/c 30 ppm/c from - 55 c to + 125 c dissipation factor: 0201/0402: q 400 + 20 c 0603: cap < 30 pf: q 800 + 20c cap 30 pf: q 1400 test conditions: cap. 1000 pf 1.0 v rms 0.2 v rms , 1 mhz 10 % cap. > 1000 pf 1.0 v rms 0.2 v rms , 1 khz 10 % aging rate: 0 % maximum per decade insulation resistance (ir): after 120 s at u r (dc): 10 g or 500 f whichever is less dielectric strength test: this is the maximum voltage the capacitors are tested for 1 s to 5 s period and the charge/discharge current does not exceed 50 ma 100 vdc: dwv at 250 % of rated voltage 250 vdc: dwv at 200 % of rated voltage ordering information vj0402 l 100 f x a c w1bc size code dielectric capacitance tolerance termination voltage pac k ag i n g process code for basic commodity 0201 0402 0603 l = ultra high q expressed in pf two significant digits followed by the number of zeros: 0r3 = 0.3 pf 1r0 = 1.0 pf 150 = 15 pf cap. value 5 pf v = 0.05 pf b = 0.10 pf c = 0.25 pf d = 0.50 pf 5 pf > cap. value < 10 pf b = 0.10 pf c = 0.25 pf d = 0.50 pf cap. value 10 pf f = 1 % g = 2 % j = 5 % x = ni barrier 100 % tin termination x = 25 v a = 50 v b = 100 v p = 250v c = 7 " reel/paper p = 13 " reel/paper
vj....w1bc ultra high q/low esr vishay surface mount multilayer ceramic chip capacitors for ultra high q commodity applications www.vishay.com for technical questions, contact: mlcc@vishay.com document number: 28547 2 revision: 21-dec-09 note ? letters indicate product thickness, see packaging quantities selection chart dielectric ultra high q eia cap. code eia size 0201 0402 0603 tolerance cap. 25 v 50 v 50 v 100 v 250 v 0r1 0.1 pf l n b 0r2 0.2 pf l n v, b 0r3 0.3 pf l n s s s v, b 0r4 0.4 pf l n s s s v, b 0r5 0.5 pf l n s s s v, b , c 0r6 0.6 pf l n s s s v, b , c 0r7 0.7 pf l n s s s v, b , c 0r8 0.8 pf l n s s s v, b , c 0r9 0.9 pf l n s s s v, b , c 1r0 1.0 pf l n s s s v, b , c 1r2 1.2 pf l n s s s v, b , c 1r5 1.5 pf l n s s s v, b , c 1r8 1.8 pf l n s s s v, b , c 2r2 2.2 pf l n s s s v, b , c 2r4 2.4 pf s v, b , c 2r7 2.7 pf l n s s s v, b , c 3r3 3.3 pf l n s s s v, b , c 3r9 3.9 pf l n s s s v, b , c 4r7 4.7 pf l n s s s v, b , c 5r6 5.6 pf l n s s s b, c, d 6r8 6.8 pf l n s s s b, c, d 8r2 8.2pf l n s s s b, c, d 100 10 pf l n s s s f, g , j 120 12 pf l n s s s f, g , j 150 15 pf l n s s s f, g , j 180 18 pf l n s s s f, g , j 220 22 pf n s s s f, g , j 240 24 pf s s s f, g , j 270 27 pf s s s f, g , j 330 33 pf s s s f, g , j 390 39 pf s s s f, g , j 470 47 pf s s s f, g , j
document number: 28547 for technical questions, contact: mlcc@vishay.com www.vishay.com revision: 21-dec-09 3 vj....w1bc ultra high q/low esr surface mount multilayer ceramic chip capacitors for ultra high q commodity applications vishay storage and handling conditions (1) to store products at 5 c to 40 c ambient tem perature and 20 % to 70 % related humdity conditions. (2) the product is recommended to be used within one year after shipment. check solderability in case of shelf life extension i s needed. c autions: a. don?t store products in a corrosive environment such as sulfide, chloride gas, or acid. it may cause oxidization of electrode, which easily be resulted in poor soldering. b. to store products on the shelf and avoid exposure to moisture. c. don?t expose products to excessive shock, vibration, direct sunlight and so on . dimensions in inches [millimeters] size code l w t max. mb 0201 [0603] 0.024 0.0012 [0.60 0.03] 0.012 0.0012 [0.30 0.03] 0.013 [0.33] 0.006 0.002 [0.15 0.05] 0402 [1005] 0.040 0.002 [1.00 0.05] 0.020 0.002 [0.50 0.05] 0.022 [0.55] 0.010 + 0.002/- 0.004 [0.25 + 0.05/- 0.10] 0603 [1608] 0.063 0.004 [1.60 0.10] 0.030 0.004 [0.80 0.10] 0.035 [0.87] 0.015 0.006 [0.40 0.15] t l mb mb w packaging quantities size code (inch/mm) thickness (mm) thickness symbol paper tape 7 " reel (c) 13 " reel (p) 0201 (0603) 0.30 0.03 l 15k - 0402 (1002) 0.50 0.05 n 10k 50k 0603 (1608) 0.80 0.07 s 4k 10k paper tape specifications reel specifications f w p 0 p 2 d 0 b 0 a 0 p 1 e b a d c dimensions of paper tape in millimeters sym. product size code 0201 0402 0603 a 0 0.37 0.03 0.62 0.05 1.02 0.05 b 0 0.67 0.03 1.12 0.05 1.82 0.05 w 8.00 0.10 8.00 0.10 8.00 0.10 e 1.75 0.05 1.75 0.05 1.75 0.05 f 3.50 0.05 3.50 0.05 3.50 0.05 d 0 1.55 0.05 1.55 0.05 1.55 0.05 p 0 4.00 0.10 4.00 0.10 4.00 0.10 p 1 2.00 0.05 2.00 0.05 4.00 0.10 p 2 2.00 0.05 2.00 0.05 2.00 0.05 reel dimensions and tape width in millimeters ? 180 mm; 7 " ? 330 mm; 13 " a 13.0 0.5 13.0 0.5 b 9.0 1.0 9.0 1.0 c 178.0 1.0 330.0 1.0 d 60.0 1.0 100.0 1.0
vj....w1bc ultra high q/low esr vishay surface mount multilayer ceramic chip capacitors for ultra high q commodity applications www.vishay.com for technical questions, contact: mlcc@vishay.com document number: 28547 4 revision: 21-dec-09 electrical characteristics 10 000 1000 100 10 1 100 1000 10 000 frequency (mhz) q 1 pf 6. 8 pf typical q value vs.frequency size 0402 frequency (ghz) typical q value vs. frequency size 0603, 250 v 10 000 100 10 1000 2.5 1.5 0.5 1 0 2 3.5 3 0.3 pf 3.3 pf 6. 8 pf q typical esr vs. frequency size 0402 1 0.1 0.01 100 1000 10 000 frequency (mhz) esr ( ) 1 pf 1.5 pf 3.3 pf 6. 8 pf frequency (ghz) typical esr vs. frequency size 0603, 250 v 10 0.1 0.01 1 2.5 1.5 0.5 1 0 2 3.5 3 0.3 pf 3.3 pf 6. 8 pf esr ( ) frequency (mhz) typical impedance vs. frequency size 0402 100 000 10 000 100 10 1 1000 10 000 100 10 1 1000 1 pf 1.5 pf 3.3 pf 6. 8 pf impedance ( )
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
